1 5
Caldwell  |  SKU: Caldwell-NM-01.00-A

Caldwell Model NM Locking, Screw Type

$3,849.00
Request a Quote

The Model NM clamp (non-marring) is manufactured with smooth gripping surfaces to prevent marring when gripping stainless steel, copper, aluminum and other polished metal plates. Due to the variety of conditions that may exist in handling these plates, it is recommended that these clamps be used in pairs and attached to a chain or wire rope sling, supported by a spreader beam. The Model NM is supplied with stainless steel gripping surfaces and is available with steel or bronze upon request. The Model NM is not intended for use in transportation of plates using mobile equipment where shocking of the load may occur.

Features

  • Turns plates from horizontal through the same 90 degree arc
  • Incorporates a Lock Open - Lock Closed feature for easy on & off clamp positioning
  • Recommended for use in pairs
  • Supplied with smooth gripping pads to prevent marring
  • Capable of gripping stainless steel, copper, aluminum and other polished metal plates

Available Models

Part No. Capacity Clamp Height Rated Capacity Shackle Hole Diameter Clamp Length Jaw Length Overall Clamp Length Shackle Thickness Clamp Width Jaw Height Max Jaw Opening Min Jaw Opening
NM-01.00-A 1 5.88 2000 2.38 9.38 4.5 15.38 0.62 3.12 2.38 0.75 —
NM-01.00-B 1 6.38 2000 2.38 9.38 4.5 15.38 0.62 3.12 2.38 1.25 0.75
NM-01.00-C 1 6.88 — 2.38 9.38 4.5 15.38 0.62 3.12 2.38 1.75 1.25
NM-01.00-D 1 7.38 — 2.38 9.38 4.5 15.38 0.62 3.12 2.38 2.25 1.75
NM-02.00-A 2 6.75 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 1 —
NM-02.00-B 2 7.25 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 1.5 0.75
NM-02.00-C 2 7.75 — 2.62 10.06 5.12 16 0.62 3.75 2.88 2 1.25
NM-02.00-D 2 8.25 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 2.5 1.75
NM-02.00-E 2 8.75 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 3 2.25
NM-04.00-A 4 7.75 8000 2.94 12.12 5.38 18.56 2.94 4.5 1 1.5 0.25
NM-04.00-B 4 8.75 8000 2.94 12.12 5.38 18.56 1 4.5 2.94 2.5 1.25
NM-04.00-C 4 9.75 — 2.94 12.12 5.38 18.56 1 4.5 2.94 3 1.75
NM-04.00-D 4 11 8000 2.94 12.12 5.38 18.56 1 4.5 2.94 4.25 3
NM-08.00-A 8 15.38 16000 3.88 20.25 11 27.75 2 6.38 5.88 3.25 1.5
NM-08.00-B 8 15.62 — 3.88 20.25 11 27.75 2 6.38 5.88 3.5 1.75
NM-08.00-C 8 16.62 — 3.88 20.25 11 27.75 2 6.38 5.88 4.5 3
NM-08.00-D 8 17.62 — 3.88 20.25 11 27.75 2 6.38 5.88 5.5 4
NM-12.00-A 12 16.12 — 3.88 20.25 11 27.75 2 7.88 5.88 4 2
NM-12.00-B 12 17.62 — 3.88 20.25 11 27.75 2 7.88 5.88 5.5 3.75
NM-12.00-C 12 18.12 — 3.88 20.25 11 27.75 2 7.88 5.88 6 4.5
Caldwell Model NM Locking, Screw Type
Caldwell

Caldwell Model NM Locking, Screw Type

From $3,849.00

The Model NM clamp (non-marring) is manufactured with smooth gripping surfaces to prevent marring when gripping stainless steel, copper, aluminum and other polished metal plates. Due to the variety of conditions that may exist in handling these plates, it is recommended that these clamps be used in pairs and attached to a chain or wire rope sling, supported by a spreader beam. The Model NM is supplied with stainless steel gripping surfaces and is available with steel or bronze upon request. The Model NM is not intended for use in transportation of plates using mobile equipment where shocking of the load may occur.

Features

Available Models

Part No. Capacity Clamp Height Rated Capacity Shackle Hole Diameter Clamp Length Jaw Length Overall Clamp Length Shackle Thickness Clamp Width Jaw Height Max Jaw Opening Min Jaw Opening
NM-01.00-A 1 5.88 2000 2.38 9.38 4.5 15.38 0.62 3.12 2.38 0.75 —
NM-01.00-B 1 6.38 2000 2.38 9.38 4.5 15.38 0.62 3.12 2.38 1.25 0.75
NM-01.00-C 1 6.88 — 2.38 9.38 4.5 15.38 0.62 3.12 2.38 1.75 1.25
NM-01.00-D 1 7.38 — 2.38 9.38 4.5 15.38 0.62 3.12 2.38 2.25 1.75
NM-02.00-A 2 6.75 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 1 —
NM-02.00-B 2 7.25 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 1.5 0.75
NM-02.00-C 2 7.75 — 2.62 10.06 5.12 16 0.62 3.75 2.88 2 1.25
NM-02.00-D 2 8.25 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 2.5 1.75
NM-02.00-E 2 8.75 4000 2.62 10.06 5.12 16 0.62 3.75 2.88 3 2.25
NM-04.00-A 4 7.75 8000 2.94 12.12 5.38 18.56 2.94 4.5 1 1.5 0.25
NM-04.00-B 4 8.75 8000 2.94 12.12 5.38 18.56 1 4.5 2.94 2.5 1.25
NM-04.00-C 4 9.75 — 2.94 12.12 5.38 18.56 1 4.5 2.94 3 1.75
NM-04.00-D 4 11 8000 2.94 12.12 5.38 18.56 1 4.5 2.94 4.25 3
NM-08.00-A 8 15.38 16000 3.88 20.25 11 27.75 2 6.38 5.88 3.25 1.5
NM-08.00-B 8 15.62 — 3.88 20.25 11 27.75 2 6.38 5.88 3.5 1.75
NM-08.00-C 8 16.62 — 3.88 20.25 11 27.75 2 6.38 5.88 4.5 3
NM-08.00-D 8 17.62 — 3.88 20.25 11 27.75 2 6.38 5.88 5.5 4
NM-12.00-A 12 16.12 — 3.88 20.25 11 27.75 2 7.88 5.88 4 2
NM-12.00-B 12 17.62 — 3.88 20.25 11 27.75 2 7.88 5.88 5.5 3.75
NM-12.00-C 12 18.12 — 3.88 20.25 11 27.75 2 7.88 5.88 6 4.5

Capacity

  • 1
  • 2
  • 4
  • 8
  • 12

Clamp Height

  • 5.88
  • 6.38
  • 6.88
  • 7.38
  • 6.75
  • 7.25
  • 7.75
  • 8.25
  • 8.75
  • 9.75
  • 11
  • 15.38
  • 15.62
  • 16.62
  • 17.62
  • 16.12
  • 18.12
View product
⚠️ Important Warnings
Back to top